Front Panel

• LEDs
  • Power
  • Ethernet Link Active
  • Ethernet Transmit Data (Tx)
  • Ethernet Receive Data (Rx)
  • RF Link Active

Rear Panel

• RF Output Jack
  • Reverse TNC Male
• Power Jack
  • 9-24V DC @ 10 Watts
  • 5.0mm removable terminal block connector
  • Mates with Phoenix part MSTB2.5/2-ST
• Console Port
  • RJ11 (6x4 modular) jack
  • EIA-232/C signal levels
  • For local connection to CueLink Manager software
• Sync In / Sync Out
  • RJ11 (6x4 modular) jacks
  • Proprietary EIA-485 network
  • Used to synchronize multiple base stations co-located within 30 feet (10m) of each other
  • Daisy-chain base stations with standard RJ11 (4-conductor modular) patch cables
• Ethernet Port
  • RJ45 (8x8 modular) jack
  • 10/100 Mbps Auto-Sensing
  • Uplink port wiring
  • Use standard CAT5 cable to connect to PC, Console, Node or Auto-Uplink Hub
  • Use crossover CAT5 cable to connect to non-uplink Hub port

RF Transceiver

• Type certified for world-wide license-free operation under FCC Part 15.247 and ETS 300.328
• 11 user-selectable channel sets:
  • 2400 - 2483 MHz (43 channels)
  • 2430 - 2483 MHz (27 channels, avoids 802.11b channels 1 & 2)
  • 2400 - 2410, 2440 - 2483 MHz (27 channels, avoids 802.11b channels 3 & 4)
  • 2400 - 2420, 2450 - 2483 MHz (27 channels, avoids 802.11b channels 5 & 6)
  • 2400 - 2430, 2470 - 2483 MHz (27 channels, avoids 802.11b channels 7 & 8)
  • 2400 - 2440, 2470 - 2483 MHz (27 channels, avoids 802.11b channels 9 & 10)
  • 2400 - 2450, 2480 - 2483 MHz (27 channels, avoids 802.11b channels 11 & 12)
  • 2422 - 2447 MHz (France & Israel - 15 channels)
  • 2453 - 2479 MHz (Canada & Mexico - 15 channels)
  • 2401 - 2427 MHz (15 channels)
  • 2431 - 2457 MHz (15 channels)
• 10mw (10dBm) or 100mW (18dBm) selectable output power
• -88dBm receiver sensitivity
• 1.8 MHz RF bandwidth

Network Protocol

• 64 user-selectable hopping patterns
• 1.23 Mbps over-the-air data rate
• 840 Kbps data throughput
• Dynamically assigned TDMA network protocol
• 24-bit CRC with automatic repeat request (ARQ)
• Point-to-point or point-to-multipoint

Power Requirements

• 9-24 Volts DC @ 10 Watts
• 10 Watts
  • 1.11A @ 9V
  • 833mA @ 12V
  • 417mA @ 24V
• Class 2 Input

Mechanical

• Ruggedized black powder-coated single-piece extruded aluminum case
• Stainless-steel hardware
• Integrated flanges with mounting holes
• Reverse screen printed Lexan legend overlays

Dimensions

• Length: 7.28" (185mm)
• Width (wo/flanges): 4.14" (105mm)
• Width (with flanges): 5.67" (144mm)
• Height: 1.95" (49mm)
• Weight: 1.5 lbs. (680g)

Environmental

• Operating Temperature
  • -22°F to 158°F
  • -30°C to 70°C
• 0 to 95% humidity, non-condensing

Setup and Monitoring

• CueLink Manager Software
  • Mac OS X (10.2+)
  • Windows 98/ME/NT/2K/XP

Note: In order to maintain the highest possible product quality, Interactive Technologies reserves the right to change specifications without notice. Some of the available functions may be altered over the life of the product and functions not described here may be added.