CueScript

CueScript is the scripting language that ties together all of CueServer's diverse set of lighting playback, show control, events, and external I/O components.

Based on terminology that should be familiar to stage lighting professionals, CueScript builds upon industry-standard commands to add show control, events and automation functions.

Below are a few examples of how simple this language can be, and how it can be used to accomplish more complex tasks.

Example: Set DMX channel 1 to 100%.

Channel 1 At 100

Example: Fade DMX channels 10 through 19 to 50% in 30 seconds.

Time 30;
Channel 10 > 19 At 50

Example: Make front-panel Button 1 run Cue 20.

For Button 1 Press Event:
    Cue 20 Go

Example: Make contact closure input 4 start a show with Cue 100 and not allow additional contact closure input until Cue 108 runs.

For Contact 4 Close Event:
    Cue 100 Go;
    Contact 4 Disable

For Cue 108 Event:
    Contact 4 Enable