|
CueServer Pro (CS-800) RS-232 Port Pinouts |
What is the pinout of the RS-232 port on the CS-800 CueServer Pro?
The CueServer Pro (CS-800) has an RS-232 port available for connecting to external equipment. The jack on the back of CueServer is a Female DB-9 type connector. It's electrical connections are as follows:RS-232 Pin
| Signal
| Pin 1
| n/c | Pin 2
| Transmit Data from CueServer | Pin 3
| Receive Data to CueServer
| | Pin 4 | n/c
| | Pin 5 | Ground
| Pin 6
| n/c
| Pin 7
| n/c
| Pin 8
| n/c
| Pin 9
| Optional +5V Power Output
|
By default, Pin 9 is not internally connected (n/c). If desired, Pin 9 can be configured to output +5V DC by shorting a jumper on the CueServer Pro PCB immediately behind the DB-9 jack. This jumper is labelled "5V-P9" on the PCB.
|
