What are the specifications for the pluggable terminal block used for the DMX Port on the back of a SceneStation?

The pluggable terminal block that plugs into the back of the SceneStation is Phoenix part number 1881338.   It is a 3-position Spring Cage Terminal Block with a 2.5mm pitch.

It is designed to accept wires from 20-26 AWG.

For best results, strip the wire 8mm (0.3 inches).

To insert the wire, use a small tool to press the orange actuator to open the internal spring cage.  Then insert the wire.  After the wire is inserted fully, release the orange actuator.